Skip to main content

Vacation at Ciwidey with ELEKTRO

My friends in the department of electrical engineering held a vacation at Ciwidey on July,17th-19th 2012. I came late to Ciwidey and followed my friend on July,18th because I had to finish some of my work first. I went to Ciwidey by chartering an angkot with 4 of my friends that come late too and arrived there in the morning. We stayed in two villas which are surrounded by a tea farm. This is the location: -7.141851,107.382675. This place was so pleasant. There is some tourist attraction that is near where we stayed such as Danau Situ Patengan, Kawah Putih, and Cimanggu. On the first day, my friends who had arrived early went to Danau Situ Patengan. I regret not coming there.

On the second day, when I arrived at Ciwidey, I enjoyed the morning air and the nice atmosphere there immediately. Then, I had my breakfast and prepared to join a game with my friends in the pool.

The Villa







We played a game in the pool.


This is a video of the game.


In the afternoon, we went to Cimanggu Tourism near our villa. There is a hot water pool containing some minerals there, but we just went to the woods behind it for jungle tracking. We were accompanied by a guide from Cimanggu. 



At the beginning of our walk in the woods, some of my friends get trouble when we decided to see the hot water spring. They walked on hot sludge and left their slippers on it. One of my friends lost one of his slippers so we and the guide helped him to find his slippers.




After we find his slippers, we continued our trip with a different route. We were going to see the cool water spring at the top of the woods.







At night, we made grilled chicken.


We lit the fireplace before slept.


Making fried rice for breakfast.


In the afternoon we had to be checked out. Before we were back to ITB, we went to Kawah Putih. If we want to go to Kawah Putih we must pass the road uphill. It's better if you can use your own vehicle but the price will be high. So we used two cars from the Kawah Putih administrator. On the way to Kawah Putih, suddenly a car that some of my friends and I rode had trouble. It stopped when passing a ramp road. So, we had to wait for a new car on the way.



At Kawah Putih





My crazy friends




What a nice vacation with my ganks :)

Comments

Popular posts from this blog

Rangkaian Sensor Infrared dengan Photo Dioda

Keunggulan photodioda dibandingkan LDR adalah photodioda lebih tidak rentan terhadap noise karena hanya menerima sinar infrared, sedangkan LDR menerima seluruh cahaya yang ada termasuk infrared. Rangkaian yang akan kita gunakan adalah seperti gambar di bawah ini. Pada saat intensitas Infrared yang diterima Photodiode besar maka tahanan Photodiode menjadi kecil, sedangkan jika intensitas Infrared yang diterima Photodiode kecil maka tahanan yang dimiliki photodiode besar. Jika  tahanan photodiode kecil  maka tegangan  V- akan kecil . Misal tahanan photodiode mengecil menjadi 10kOhm. Maka dengan teorema pembagi tegangan: V- = Rrx/(Rrx + R2) x Vcc V- = 10 / (10+10) x Vcc V- = (1/2) x 5 Volt V- = 2.5 Volt Sedangkan jika  tahanan photodiode besar  maka tegangan  V- akan besar  (mendekati nilai Vcc). Misal tahanan photodiode menjadi 150kOhm. Maka dengan teorema pembagi tegangan: V- = Rrx/(Rrx + R2) x Vcc V- = 150 / (150+10) x Vcc V- = (150/160) x 5

Rangkaian Sensor Cahaya dengan LDR

LDR(Light Depending Resistor) adalah resistor yang nilai hambatannya bergantung dari intensitas cahaya yang ia terima. Jika intensitas cahaya rendah (gelap) maka nilai resistansinya akan menjadi sangat besar (mencapai 1MOhm atau lebih), sedangkan jika intensitas cahaya tinggi (terang) nilai resistansinya menjadi kecil (mencapai 10kOhm atau kurang). Sifat ini dapat kita pergunakan dalam rangkaian sensor cahaya. Misalkan jika kita menginginkan sensor cahaya yang akan menyalakan lampu indikasi ketika ada cahaya dan mematikan lampu indikasi ketika tidak ada cahaya. Kita dapat menggunakan rangkaian seperti gambar di bawah ini. Transistor NPN berfungsi sebagai gate. Arus dari kolektor akan mengalir menuju emitor jika arus dari base besar namun jika arus pada base kecil maka arus dari kolektor tidak akan menuju emitor. Pada rangkaian sensor cahaya dengan LDR, ketika intensitas cahaya tinggi (terang) maka arus dari VCC akan melewati LDR kemudian melewati RESISTOR dan masuk ke

Installing APCu in PHP 7

APCu is one of caching application for PHP. In this case, I use PHP 7.0 on Ubuntu 16.04. In PHP 7.0, this application is provided via PEAR. First, install PEAR. $ sudo apt-get install php-pear Install APCu. If an error occured state that there's no phpize, you need to install PHP 7.0-dev which provide phpize support. $ sudo apt-get install php7.0-dev $ sudo pecl install apcu Create APCu module configuration in PHP modules directory. $ sudo echo "extension = apcu.so" >> /etc/php/7.0/mods-available/apcu.ini Add that configuration to PHP FPM and CLI. $ sudo ln -s /etc/php/7.0/mods-available/apcu.ini /etc/php/7.0/fpm/conf.d/30-apcu.ini $ sudo ln -s /etc/php/7.0/mods-available/apcu.ini /etc/php/7.0/cli/conf.d/30-apcu.ini Restart PHP FPM.

Configuring Swap Memory on Ubuntu Using Ansible

If we maintain a Linux machine with a low memory capacity while we are required to run an application with high memory consumption, enabling swap memory is an option. Ansible can be utilized as a helper tool to automate the creation of swap memory. A swap file can be allocated in the available storage of the machine. The swap file then can be assigned as a swap memory. Firstly, we should prepare the inventory file. The following snippet is an example, you must provide your own configuration. [server] 192.168.1.2 [server:vars] ansible_user=root ansible_ssh_private_key_file=~/.ssh/id_rsa Secondly, we need to prepare the task file that contains not only the tasks but also some variables and connection information. For instance, we set /swapfile  as the name of our swap file. We also set the swap memory size to 2GB and the swappiness level to 60. - hosts: server become: true vars: swap_vars: size: 2G swappiness: 60 For simplicity, we only check the exi

Setting Up Next.js Project With ESLint, Typescript, and AirBnB Configuration

If we initiate a Next.js project using the  create-next-app tool, our project will be included with ESLint configuration that we can apply using yarn run lint . By default, the tool installs eslint-config-next and extends next/core-web-vitals in the ESLint configuration. The Next.js configuration has been integrated with linting rules for React and several other libraries and tools. yarn create next-app --typescript For additional configuration such as AirBnB, it is also possible. First, we need to install the peer dependencies of eslint-config-airbnb . We also add support for Typescript using eslint-config-airbnb-typescript . yarn add --dev eslint-config-airbnb eslint-plugin-import eslint-plugin-jsx-a11y eslint-plugin-react eslint-plugin-react-hooks yarn add --dev eslint-config-airbnb-typescript @typescript-eslint/eslint-plugin @typescript-eslint/parser After that, we can update the .eslintrc.json file for the new configuration. { "extends": [ "airb

Managing MongoDB Records Using NestJS and Mongoose

NestJS is a framework for developing Node.js-based applications. It provides an additional abstraction layer on top of Express or other HTTP handlers and gives developers a stable foundation to build applications with structured procedures. Meanwhile, Mongoose is a schema modeling helper based on Node.js for MongoDB. There are several main steps to be performed for allowing our program to handle MongoDB records. First, we need to add the dependencies which are @nestjs/mongoose , mongoose , and @types/mongoose . Then, we need to define the connection configuration on the application module decorator. import { MongooseModule } from '@nestjs/mongoose'; @Module({ imports: [ MongooseModule.forRoot('mongodb://localhost:27017/mydb'), ], controllers: [AppController], providers: [AppService], }) Next, we create the schema definition using helpers provided by NestJS and Mongoose. The following snippet is an example with a declaration of index setting and an o