Raspberry Pi 3 provides a built-in Bluetooth module. The latest Raspbian has been bundled with tools for enabling Bluetooth connection. The Bluetooth icon will be shown up on the top right corner of the desktop. It's a tool to discover available Bluetooth devices and connect Pi with Bluetooth devices. It is easy to connect any Bluetooth-enabled electronic device with Pi. But, sometimes Pi will fail to connect, especially for Bluetooth device that has no standardized services. From a terminal, we can use the bluetoothctl tool to scan and connect with a Bluetooth device. You should make sure that the BlueZ protocol stack has been installed by running $ apt-get install bluez Run bluetoothctl to enter the tool command window Turn the power on by running power on (Optional) You can set AutoEnable=true in /etc/bluetooth/main.conf if you want to make the Bluetooth auto power-on after reboot. Run devices to see which devices have been paired Run scan on if your desired d