Skip to main content

Tunneling SSH over HTTP Proxy

Many offices and campuses implement proxy server in their networks. This situation is frustating by most developer who maintain any server outside the office or campus networks. So tunneling SSH over HTTP proxy is a best deal for them. Some apps and methods can be used to do that. But, I found this following method is easy.
  • Download corkscrew from http://www.agroman.net/corkscrew/
  • Extract the downloaded file $ tar -xzvf corkscrew.tar.gz
  • Go into corkscrews extracted directory, configure, and install it
    • $ cd corkscrew
    • $ ./configure
    • $ make install 
  • Corkscrew is now installed in /usr/local/bin
  • Add SSH configuration file on $HOME/.ssh/config
  • Write these lines:
Host *
     ProxyCommand corkscrew proxy.example.com 8080 %h %p
  • If your proxy use username and password, you can use this code:
Host *
     ProxyCommand corkscrew proxy.example.com 8080 %h %p ~/.ssh/proxyauth
  • In ~/.ssh/proxyauth, put your credentials: <username>:<password>
  • Now you can try $ ssh yourremote.server

Comments

Popular posts from this blog

Configuring Swap Memory on Ubuntu Using Ansible

If we maintain a Linux machine with a low memory capacity while we are required to run an application with high memory consumption, enabling swap memory is an option. Ansible can be utilized as a helper tool to automate the creation of swap memory. A swap file can be allocated in the available storage of the machine. The swap file then can be assigned as a swap memory. Firstly, we should prepare the inventory file. The following snippet is an example, you must provide your own configuration. [server] 192.168.1.2 [server:vars] ansible_user=root ansible_ssh_private_key_file=~/.ssh/id_rsa Secondly, we need to prepare the task file that contains not only the tasks but also some variables and connection information. For instance, we set /swapfile  as the name of our swap file. We also set the swap memory size to 2GB and the swappiness level to 60. - hosts: server become: true vars: swap_vars: size: 2G swappiness: 60 For simplicity, we only check the exi

Rangkaian Sensor Infrared dengan Photo Dioda

Keunggulan photodioda dibandingkan LDR adalah photodioda lebih tidak rentan terhadap noise karena hanya menerima sinar infrared, sedangkan LDR menerima seluruh cahaya yang ada termasuk infrared. Rangkaian yang akan kita gunakan adalah seperti gambar di bawah ini. Pada saat intensitas Infrared yang diterima Photodiode besar maka tahanan Photodiode menjadi kecil, sedangkan jika intensitas Infrared yang diterima Photodiode kecil maka tahanan yang dimiliki photodiode besar. Jika  tahanan photodiode kecil  maka tegangan  V- akan kecil . Misal tahanan photodiode mengecil menjadi 10kOhm. Maka dengan teorema pembagi tegangan: V- = Rrx/(Rrx + R2) x Vcc V- = 10 / (10+10) x Vcc V- = (1/2) x 5 Volt V- = 2.5 Volt Sedangkan jika  tahanan photodiode besar  maka tegangan  V- akan besar  (mendekati nilai Vcc). Misal tahanan photodiode menjadi 150kOhm. Maka dengan teorema pembagi tegangan: V- = Rrx/(Rrx + R2) x Vcc V- = 150 / (150+10) x Vcc V- = (150/160) x 5

Setting Up Next.js Project With ESLint, Typescript, and AirBnB Configuration

If we initiate a Next.js project using the  create-next-app tool, our project will be included with ESLint configuration that we can apply using yarn run lint . By default, the tool installs eslint-config-next and extends next/core-web-vitals in the ESLint configuration. The Next.js configuration has been integrated with linting rules for React and several other libraries and tools. yarn create next-app --typescript For additional configuration such as AirBnB, it is also possible. First, we need to install the peer dependencies of eslint-config-airbnb . We also add support for Typescript using eslint-config-airbnb-typescript . yarn add --dev eslint-config-airbnb eslint-plugin-import eslint-plugin-jsx-a11y eslint-plugin-react eslint-plugin-react-hooks yarn add --dev eslint-config-airbnb-typescript @typescript-eslint/eslint-plugin @typescript-eslint/parser After that, we can update the .eslintrc.json file for the new configuration. { "extends": [ "airb

Resize VirtualBox LVM Storage

VirtualBox is a free solution to host virtual machines on your computer. It provides configuration options for many components on our machine such as memory, storage, networking, etc. It also allows us to resize our machine storage after its operating system is installed. LVM is a volume manager in a Linux platform that helps us to allocate partitions in the system and configure the storage size that will be utilized for a specific volume group. There are some points to be noticed when we work with LVM on VirtualBox to resize our storage. These are some steps that need to be performed. 1. Stop your machine before resizing the storage. 2. Set new storage size using GUI by selecting " File > Virtual Media Manager > Properties " then find the desired virtual hard disk name that will be resized. OR , by running a CLI program located in " Program Files\Oracle\VirtualBox\VBoxManage.exe ".  cd "/c/Program Files/Oracle/VirtualBox" ./VBoxManage.exe list

Managing MongoDB Records Using NestJS and Mongoose

NestJS is a framework for developing Node.js-based applications. It provides an additional abstraction layer on top of Express or other HTTP handlers and gives developers a stable foundation to build applications with structured procedures. Meanwhile, Mongoose is a schema modeling helper based on Node.js for MongoDB. There are several main steps to be performed for allowing our program to handle MongoDB records. First, we need to add the dependencies which are @nestjs/mongoose , mongoose , and @types/mongoose . Then, we need to define the connection configuration on the application module decorator. import { MongooseModule } from '@nestjs/mongoose'; @Module({ imports: [ MongooseModule.forRoot('mongodb://localhost:27017/mydb'), ], controllers: [AppController], providers: [AppService], }) Next, we create the schema definition using helpers provided by NestJS and Mongoose. The following snippet is an example with a declaration of index setting and an o

Installing VSCode Server Manually on Ubuntu

I've ever gotten stuck on updating the VSCode server on my remote server because of an unstable connection between my remote server and visualstudio.com that host the updated server source codes. The download and update process failed over and over so I couldn't remotely access my remote files through VSCode. The solution is by downloading the server source codes through a host with a stable connection which in my case I downloaded from a cloud VPS server. Then I transfer the downloaded source codes as a compressed file to my remote server through SCP. Once the file had been on my remote sever, I extracted them and align the configuration. The more detailed steps are as follows. First, we should get the commit ID of our current VSCode application by clicking on the About option on the Help menu. The commit ID is a hexadecimal number like  92da9481c0904c6adfe372c12da3b7748d74bdcb . Then we can download the compressed server source codes as a single file from the host.