Enabling Single Webcam for Multiple Applications Access in Linux

A webcam can not be accessed by two or more applications simultaneously. The solution is you can duplicate the video stream and make it available for any application. In short, you create a virtual webcam.
First, a webcam is commonly detected on /dev/video*. Before you go through the steps to duplicate video stream, you should check whether your webcam is working. You can try to capture video using VLC by this command. (For example, your webcam is on /dev/video0)

$ vlc v4l2:///dev/video0

If it doesn't work, you can try to change its mode to 0777 and make sure there are no other applications accessing it. If it still doesn't work, you can buy a new webcam. Seriously. Don't buy a cheap and unknown-brand webcam. I have $5 webcam and it had wasted my time.

$ apt-get install ffmpeg linux-generic v4l2loopback-dkms

FFmpeg is the main application that will access your webcam and duplicate its video stream. V4L2loopback is needed to create multiple virtual capture devices (loopback devices) in Linux, which FFmpeg uses to store duplicated video streams and be accessed by other applications. For example, I want to enable two loopback devices. The new devices will be available on /dev/video* in a sequence.

$ modprobe v4l2loopback devices=2

Then, you can duplicate your webcam.

$ ffmpeg -f v4l2 -i /dev/video0 -f v4l2 /dev/video1 -f v4l2 /dev/video2

Or, you can also set the video resolution.

$ ffmpeg -f video4linux2 -s 800x600 -i /dev/video0 -codec copy -f v4l2 /dev/video1 -codec copy -f v4l2 /dev/video2

After you don't need the loopback devices, you can remove them.

$ modprobe -r v4l2loopback

If there are any questions or suggestions about this article, just leave them in the comment field below. If you think this article is useful, please share it with your colleagues.

Comments

Deploying a Web Server on UpCloud using Terraform Modules

In my earlier post , I shared an example of deploying UpCloud infrastructure using Terraform from scratch. In this post, I want to share how to deploy the infrastructure using available Terraform modules to speed up the set-up process, especially for common use cases like preparing a web server. For instance, our need is to deploy a website with some conditions as follows. The website can be accessed through HTTPS. If the request is HTTP, it will be redirected to HTTPS. There are 2 domains, web1.yourdomain.com and web2.yourdomain.com . But, users should be redirected to "web2" if they are visiting "web1". There are 4 main modules that we need to set up the environment. Private network. It allows the load balancer to connect with the server and pass the traffic. Server. It is used to host the website. Load balancer. It includes backend and frontend configuration. Dynamic certificate. It is requ...

What's Good About Strapi, a Headless CMS

Recently, I've been revisiting Strapi as a solution for building backend systems. I still think this headless CMS can be quite useful in certain cases, especially for faster prototyping or creating common websites like company profiles or e-commerce platforms . It might even have the potential to handle more complex systems. With the release of version 5, I'm curious to know what updates it brings. Strapi has launched a new documentation page, and it already feels like an improvement in navigation and content structure compared to the previous version. That said, there's still room for improvement, particularly when it comes to use cases and best practices for working with Strapi. In my opinion, Strapi stands out with some compelling features that could catch developers' attention. I believe three key aspects of Strapi offer notable advantages. First, the content-type builder feature lets us design the data structure of an entity or database model , including ...

Installing VSCode Server Manually on Ubuntu

I've ever gotten stuck on updating the VSCode server on my remote server because of an unstable connection between my remote server and visualstudio.com that host the updated server source codes. The download and update process failed over and over so I couldn't remotely access my remote files through VSCode. The solution is by downloading the server source codes through a host with a stable connection which in my case I downloaded from a cloud VPS server. Then I transfer the downloaded source codes as a compressed file to my remote server through SCP. Once the file had been on my remote sever, I extracted them and align the configuration. The more detailed steps are as follows. First, we should get the commit ID of our current VSCode application by clicking on the About option on the Help menu. The commit ID is a hexadecimal number like 92da9481c0904c6adfe372c12da3b7748d74bdcb . Then we can download the compressed server source codes as a single file from the host. ...

Increase of Malicious Activities and Implementation of reCaptcha

In recent time, I've seen the increase of malicious activities such as login attempts or phishing emails to some accounts I manage. Let me list some of them and the actions taken. SSH Access Attempts This happened on a server that host a Gitlab server. Because of this case, I started to limit the incoming traffic to the server using internal and cloud firewall provided by the cloud provider. I limit the exposed ports, connected network interfaces, and allowed protocols. Phishing Attempts This typically happened through email and messaging platform such as Whatsapp and Facebook Page messaging. The malicious actors tried to share a suspicious link lured as invoice, support ticket, or something else. Malicious links shared Spammy Bot The actors leverage one of public endpoint on my website to send emails. Actually, the emails won't be forwarded anywhere except to my own email so this just full my inbox. This bot is quite active, but I'm still not sure what...

Enabling Imagick to Read or Manipulate PDF File

Imagick is one of the popular tools for manipulating image files. Some popular languages such as PHP and Node.js have provided libraries that can be used for manipulating images based on Imagick. One of the common use cases for using Imagick is for generating a thumbnail from an image or PDF file. In PHP, we can install the PHP Imagick module by running the following command. apt install php-imagick Then, we can verify the installation by running this command. php -m | grep imagick For example, we want to generate a thumbnail image for a PDF file in PHP. We can use the following script. <?php $im = new Imagick(); $im->setResolution(50, 50); // set the reading resolution before read the file $im->readImage('file.pdf[0]'); // read the first page of the PDF file (index 0) //$im = $im->flattenImages(); // @deprecated // handle transparency problem $im = $im->mergeImageLayers( Imagick::LAYERMETHOD_FLATTEN ); $im->setImageFormat('png'); $im->write...

Configuring Swap Memory on Ubuntu Using Ansible

If we maintain a Linux machine with a low memory capacity while we are required to run an application with high memory consumption, enabling swap memory is an option. Ansible can be utilized as a helper tool to automate the creation of swap memory. A swap file can be allocated in the available storage of the machine. The swap file then can be assigned as a swap memory. Firstly, we should prepare the inventory file. The following snippet is an example, you must provide your own configuration. [server] 192.168.1.2 [server:vars] ansible_user=root ansible_ssh_private_key_file=~/.ssh/id_rsa Secondly, we need to prepare the task file that contains not only the tasks but also some variables and connection information. For instance, we set /swapfile as the name of our swap file. We also set the swap memory size to 2GB and the swappiness level to 60. - hosts: server become: true vars: swap_vars: size: 2G swappiness: 60 For simplicity, we only check the...

LUKI NOTES

Search This Blog